Skip to content
nVent CADDY

nVent CADDY 4Z34 Multi-Function Clip

0 Reviews
SKU
4Z34

The nVent CADDY 4Z34 is a spring-steel multi-function clip with a CADDY Armour finish, specified for 1/4–3/8-inch rod, #12–#8 wire, and 1/8–7/16-inch flange. Its static ratings are 25 lb in F1 on horizontal flange only and 20 lb in F2; on 3/8-inch smooth rod in the F2 direction, the rating is 12.5 lb.

  • Rod Size Range
  • Wire Size Range
  • Flange Range
  • Static Load Ratings
  • Spring Steel and CADDY Armour
  • 1/4-Inch Hole; No Screw Included

Product Overview

The nVent CADDY 4Z34 is a spring-steel multi-function clip with a CADDY Armour finish, specified for 1/4–3/8-inch rod, #12–#8 wire, and 1/8–7/16-inch flange. Its static ratings are 25 lb in F1 on horizontal flange only and 20 lb in F2; on 3/8-inch smooth rod in the F2 direction, the rating is 12.5 lb.

Technical Specifications

Product information and specifications for the selected item.

SKU: 4Z34

Product Information

BrandnVent CADDY
MPN4Z34
SKU4Z34
UPC / GTIN782856505006
CategoryFixture Mounting & Accessories

Key Specs

Overall Width/Diameter (mm)19.1
MaterialMetal

Accessory & Fit

Static Rating ApplicationFor low-voltage communication cables
Drop-Wire/Rod NoteMay require a dedicated drop wire/rod; consult the local code authority
Installation SequenceSqueeze the fastener, connect the top edge over the rod/wire, then twist into place and release

Features & Standards

StandardsUL
Made in USAYes
Technical Assessment Scope and Validity4Z34 is listed under ITB-KOT-2019/0889 edition 2; stated validity date 17 December 2030
Dynamic Load LimitationStatic ratings do not account for dynamic loading such as wind, water or seismic loads, unless otherwise noted
Calculated Load Capacity0.10 kN
F1 Static Load Rating25 [111]; horizontal flange only lb [N]
Design Capacity Safety Factor3.0 (used for calculated load capacities)
F2 Static Load Rating20 [90] lb [N]
F2 Rating on 3/8-in. Smooth Rod12.5 [55] on 3/8-in. smooth rod in the F2 direction; not listed for flexible conduit, tubing or cable lb [N]

Material & Finish

MaterialMetal
Protective CoatingCADDY Armour; minimum thickness 12 µm

Dimensions & Weight

Overall Width/Diameter (mm)19.1

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.