Skip to content
Carlon

Carlon Curved-Lid PVC J-Box Assembly, 12"W × 12"H × 4"L

0 Reviews
SKU
E1212C24

Curved-lid J-box assembly, nonmetallic PVC, 12"W × 12"H × 4"L, NEMA 4X, gray, no knockoutsAdditional specifications Additional specifications · Operating Conditions Temperature and UV exposure Avoid climates where temperatures regularly exceed 100°F with high UV radiation; excessive temperature, moisture, or UV can discolor or distort exposed plastic. ...

Needs Data

Product Overview

Curved-lid J-box assembly, nonmetallic PVC, 12"W × 12"H × 4"L, NEMA 4X, gray, no knockouts

Additional specifications

Additional specifications · Operating Conditions

Temperature and UV exposure Avoid climates where temperatures regularly exceed 100°F with high UV radiation; excessive temperature, moisture, or UV can discolor or distort exposed plastic.

Additional specifications · Construction

Tamper-resistant fasteners Supplied with tamper-resistant screws.
Electrical and corrosion properties Nonconductive and noncorrosive.
Fixture mounting The lid provides locations for mounting weatherproof fixtures.
Included gasket A gasket is included in the kit.
Corrosion resistance Designed to resist rust and corrosion

Additional specifications · Finish

Lid finish The lid is paintable.
Lid paintability Paintable

Additional specifications · Installation

Deep-install fasteners Four 3/4-in sheet-metal screws are specified and are not supplied in.
Deep-installation gasket procedure For installations deeper than 3 ft, do not reinstall the gasket until the designated deep-installation step.
Concrete-form compatibility Can be used in 18-, 24-, 30-, and 36-in. forms.
Post-pour lid removal After concrete cures, loosen or remove the corner screws and pull the lid using opposite-corner grip points
Deep-install gasket procedure For installations deeper than 3 ft, defer gasket installation until Step 5
Concrete-form attachment Attach the assembled lid and base to the concrete form using four supplied sheet-metal screws
Installer qualification Install by a qualified electrician in accordance with national and local electrical codes.
Deep-installation fastening The deeper-installation procedure uses four 3/4-in. sheet-metal screws (not supplied) with four supplied captive screws.

Additional specifications · Compliance

TSCA status TSCA Section 6(h) Compliant
CSA certification CSA certified.
UL listing scope UL Listed; listing applies to the assembly only.
Electrical enclosure standards UL 50; CSA C22.2 No. 94.1
RoHS status RoHS3 Compliant
REACH status REACH 247 Compliant

Additional specifications · Compatibility

Lid mounting compatibility Lid provides locations to mount receptacles and weatherproof covers

Technical Specifications

Product information and specifications for the selected item.

SKU: E1212C24

Product Information

BrandCarlon
MPNE1212C24
SKUE1212C24
UPC / GTIN034481141020
CategoryElectrical Boxes

Key Specs

Number of Knockouts/Holes0
Knockout/Hole Size (in.)No Knockout(s)
Metallic/Non-MetallicNon-Metallic

Capacity & Configuration

Number of Knockouts/Holes0
Knockout/Hole Size (in.)No Knockout(s)
ShapeSquare
NEMA ConfigurationNEMA 4X

Construction & Application

Metallic/Non-MetallicNon-Metallic
MaterialPVC
Color FamilyGray
Temperature and UV exposureAvoid climates where temperatures regularly exceed 100°F with high UV radiation; excessive temperature, moisture, or UV can discolor or distort exposed plastic.
Tamper-resistant fastenersSupplied with tamper-resistant screws.
Lid finishThe lid is paintable.
Electrical and corrosion propertiesNonconductive and noncorrosive.
Deep-install fastenersFour 3/4-in sheet-metal screws are specified and are not supplied in.
TSCA statusTSCA Section 6(h) Compliant
Deep-installation gasket procedureFor installations deeper than 3 ft, do not reinstall the gasket until the designated deep-installation step.
Concrete-form compatibilityCan be used in 18-, 24-, 30-, and 36-in. forms.
Post-pour lid removalAfter concrete cures, loosen or remove the corner screws and pull the lid using opposite-corner grip points
CSA certificationCSA certified.
Fixture mountingThe lid provides locations for mounting weatherproof fixtures.
UL listing scopeUL Listed; listing applies to the assembly only.
Electrical enclosure standardsUL 50; CSA C22.2 No. 94.1
Lid paintabilityPaintable
Lid mounting compatibilityLid provides locations to mount receptacles and weatherproof covers
Included gasketA gasket is included in the kit.
Deep-install gasket procedureFor installations deeper than 3 ft, defer gasket installation until Step 5
Concrete-form attachmentAttach the assembled lid and base to the concrete form using four supplied sheet-metal screws
RoHS statusRoHS3 Compliant
REACH statusREACH 247 Compliant
Corrosion resistanceDesigned to resist rust and corrosion
Installer qualificationInstall by a qualified electrician in accordance with national and local electrical codes.
Deep-installation fasteningThe deeper-installation procedure uses four 3/4-in. sheet-metal screws (not supplied) with four supplied captive screws.

Dimensions & Weight

Height (in.)12
Width (in.)12
Length (in.)4
Weight (lb.)4.9364

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.