Skip to content

Eaton Crouse-Hinds Cam-Lok J Series E1016 Insulated Male Receptacle, Black

0 Reviews
SKU
E1016-1700-BLACK

The Eaton Crouse-Hinds Cam-Lok J Series E1016-1700 is a black insulated male receptacle with a double set-screw connection. It is rated 400 A continuous at 600 VAC/DC, has a thermoplastic elastomer (TPE) body, and measures 2.25 in high × 2.25 in wide × 4.25 in long. Specifications identify it as UL Listed with a NEMA 3R rating.

  • 400 A Continuous, 600 VAC/DC
  • Male Cam-Lok J Series Receptacle
  • Double Set-Screw Connection
  • Copper Conductors Only
  • Black Insulated TPE Body
  • Direct Steel-Panel Mounting

Product Overview

The Eaton Crouse-Hinds Cam-Lok J Series E1016-1700 is a black insulated male receptacle with a double set-screw connection. It is rated 400 A continuous at 600 VAC/DC, has a thermoplastic elastomer (TPE) body, and measures 2.25 in high × 2.25 in wide × 4.25 in long. Specifications identify it as UL Listed with a NEMA 3R rating.

Technical Specifications

Product information and specifications for the selected item.

SKU: E1016-1700-BLACK

Product Information

BrandEaton
MPNE1016-1700
SKUE1016-1700-BLACK
CategoryLugs

Key Specs

Maximum Amperage (A)400
Certifications and ListingsUL Listed
Height (in.)2.25
Width (in.)2.25

Electrical & Listings

Maximum Amperage (A)400
Certifications and ListingsUL Listed
Connection typeDouble set screw
Cable-jacket cut length1-5/8 in
Locking mechanismDouble cam
Contact materialHigh-conductivity brass
Standards typeNEC/CEC
ColorBlack
NEMA rating3R
Operating ambient temperature-40 to 105 °C
Mounting suitabilitySafety insulated for direct mounting to steel panels
Body materialThermoplastic elastomer (TPE)
Voltage rating600 Vac/dc
Connector genderMale
Area classificationOrdinary/Non-Hazardous Locations
Set-screw tightening torque120 for 1/0–2/0 AWG; 220 for 3/0–4/0 AWG in·lbf
Cable size1/0–4/0 AWG
Locked-contact pulling force1,000 lb
Mating and unmating procedureFully engage, then rotate 1/3 turn clockwise to mate; rotate 1/3 turn counter-clockwise and pull straight out to unmate
CSA complianceListed to CSA C22.2 No. 1691-12; CSA certified to C22.2 No. 182.3 (LR13963)
Set-screw tool size7/32 in
Contact protectionRecessed contacts protected by an insulating jacket extending beyond the contact ends
Contact pressureApproximately 600 after a 1/3 turn lb/in²
Conductor materialCopper (CU) conductors only

Dimensions & Weight

Height (in.)2.25
Width (in.)2.25
Length (in.)4.25
Weight (lb.)1

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.